Altoids Tin Divider - 4-Way

Simple 4-way divider/organizer for a standard Altoids tin

**I have updated this project and posted it HERE**

https://www.instructables.com/Altoids-Tin-Divider-Rev2-4-Way-6-Way/

1. Attached .SVG file containing vectors for both 3mm and 1.5mm board designs created with Inkscape
2. Laser Engraver/Cutter (I used 10w Falcon A1, Power=90%, Speed 350mm/m; but should work with any)
3. 3mm or 1.5mm Basswood (or similar)
4. Standard Altoids-style/size tin

1. Using a laser cutter, cut out one of the designs contained in the .SVG file depending on your board thickness
2. Slide together perpendicular
3. Insert into tin can (should be a tight fit; may have to slightly flex the tin walls)