Bloodhound Services

This a step by step on how to build a Bloodhound Service device, it’s essentially a tracker for the elderly and those that require extra care. It’s built as a collar for service dogs that when alerted it activates the camera that lives streams to specialist able to assist the situation.

1. Picture frame
2. CD
3. 3 Magnets
4. 3 Sets of wires
5. 2 Remotes
6. 2 Clips
7. Marble
8. Silicone packet
9. Black Dongle
10. Tools: Scissors, Super Glue, Sharpie, Pen, Pencil

Use paper to draw up a map of the area that the tracker would be used in. One side is the main home and its layout, the other side is areas someone might also be at. Place map in frame with CD over the designated area.

Remove the attached wire to the black dongle

1. Gather wires needed and scissors
2. Remove excess attachments
3. Remove red wire from the rest
4. Braid the three wires to each other
5. Remove excess

1. Attach the magnet and clips to the collar
2. Using the sharpie color in the middle of the magnet to create an illusion of a camera

1. Gather remainding magnets, glue, silicone packet, and marble
2. Open up packet and attach the inside to the magnets and marble

Now all parts make the concept of the Bloodhound Services, a tracker that can tune in with those requiring extra care (elderly folk) that live alone.

Using my iPad, pencil and FreeForm I was able to create the final form of BHS