Camera-Guided Laser Engraving With a Cheap USB Webcam

by AhmetK62 in Workshop > Laser Cutting

83 Views, 0 Favorites, 0 Comments

Camera-Guided Laser Engraving With a Cheap USB Webcam

aimburn.png
2- coklu kazıma

Just add USB camera above your diode laser engraver or laser-equipped 3D printer: see the material on camera, place the design on it, and the laser burns exactly there.

Setup Camera and Software

aimburn_camera_guide_en.png
kurulum1.png
kurulum3.png
kurulum4.png
aimburn.png

Add a USB camera above your laser engraver and install the Aimburn software. See your bed live on screen. Place your design exactly where you want it, and the laser burns it right there. Your machine can do more than you think.


https://github.com/ahmetkorkmaz82/aimburn/releases