Coin Collecting Through the Ages (A Super Simple Cardboard Coin Collectors Box)

by the 1st in Craft > Cardboard

32 Views, 2 Favorites, 0 Comments

Coin Collecting Through the Ages (A Super Simple Cardboard Coin Collectors Box)

IMG_3159.jpeg

This project does not contain only one date but spreads across generations. Rather than making something from one of these time periods, I made something to collect old coins over time. I have grown a recent liking for coin collecting, but I didn’t want to buy an expensive coin-collecting binder or box, so I decided to make one! When making the box, I thought about what I should make it out of. I decided to make it out of cardboard so that it would be cheap and people would be able to easily make it. This project is helpful because it gives people an easy way to store and protect coins that may have value. It also shows that you don’t need expensive supplies to create something useful. The coin box can be used over a long period of time, allowing someone to collect and save coins across generations. Overall, this project is a good idea because it is affordable and easy to create, while still connecting to history and personal interests. I hope you enjoy reading!

Supplies

  1. Cardboard
  2. Hot Glue
  3. Ruler
  4. Pencil/Pen
  5. Coins!

Finding the Right Box

IMG_5551_converted.jpg
IMG_5550_converted.jpg
IMG_5549_converted.jpg
IMG_5548_converted.jpg

This part is important so that you can match the same measurements as I had. Try to find a box that is 12 inches by 12 inches. This will make it easier because it is a perfect square. Once you find the right box, mark out the lines as shown in the image. These lines will help you when placing the walls.

Making the Walls

IMG_5584_converted.jpg
IMG_5583_converted.jpg
IMG_5578_converted.jpg
IMG_5580_converted.jpg
IMG_5581_converted.jpg
IMG_5582_converted.jpg
IMG_5579_converted.jpg

For this step, make the walls the length and width of a ruler, then make 99 small 1 in by 1 in squares. Start by gluing down each wall, then glue the small squares in between each wall.

Adding Coins and Dates

IMG_5586_converted.jpg
IMG_5587_converted.jpg
IMG_5589_converted.jpg
IMG_5585_converted.jpg

For this part, look at your coins and organize them into certain categories. Once you have those categories, mark them on the box as shown. Place the coins below each category marked on the top of the box. This is how you will keep all of your coins safe and organized.

Adding the Seel

IMG_5593_converted.jpg
IMG_5590_converted.jpg
IMG_5591_converted.jpg

This part is important because it will keep your coins safe and clean. There are many ways to make a clip, but I decided to do it with a twisty tie. I made a small tube out of cardboard, then glued the tube onto the top of the box as shown. Then I added the twisty tie to the other side.

Finale Thoughts

IMG_5588_converted.jpg

This project might not seem important to some people, but to my fellow coin collectors, this project is very useful! Coin folders/boxes can cost anywhere from $2–$150+, but this project costs almost nothing! I really hope this was helpful. If I had to put this project in a specific time period, I would put it in (pre-400). This is because we all wish we had a coin from then! (;


Thanks for reading!