Fairy Bracelet | a Step Into My StoryBook

It all started with a conversation with my mother.

She casually mentioned that she used to make jewellery in her childhood. And I was like — wow. I craved to make my own jewellery But not something ordinary, something different, something that felt like it was truly mine.The only problem? I had no idea what to make it on.

Initially, i was blanked about the topic i have to choose but suddenly, something clicked. Why not combine my mother's childhood with mine? She had jewellery. I had flowers.

Flowers are my obsession. I just go mad whenever I see one. I stop, I stare, I can't help it. So I thought — why not use it as the topic for jewellery!

Now the Topic was decided.

But turning that imagination into a real design took so many days and so much effort. It wasn't simple at all. Once the design was finally ready, I moved to making it — and yes, there were problems along the way. But I handled each one, step by step.

And then, one day, it was done.

The moment I looked at it — it looked like a fairy stepped out of a storybook.

So I named it the Fairy Bracelet.

And I was so, so happy.

Raw Material

• 0.5 mm gold wire (70cm long)

• Golden circular wire (20 cm long)

• 0.4 mm crystal beads (sky blue)

• 0.4 mm crystal beads (black)

• 6 leaves (green)

• 5 flowers (blue)

• 1 tulip flower (blue)

• 1 heart shaped bead

• 2 golden chain (3 cm long each)

• 1 lobster (golden)

• 2 jump rings (golden)

• 1 fuse wire (golden)

• Cutter

• Flat nose plier

• Long double round nose plier

I started by taking the circular wire and gently curving it into shape. Once I was happy with the round form, I locked the ends securely. That part was simple, but things got a little tricky when I picked up the 0.5 mm gold wire. I had to knot it onto one side of the circular wire, and at first, it kept slipping. It was quite difficult to make a neat knot, but after a few tries, I figured out that wrapping it two to three times on the same spot helped me secure it better. That gave me a good start.

Then I added my first bead and wrapped the thin wire around the circular wire in a smooth, circular motion. I gave it about 2–3 rounds to hold everything in place. After that, I added a flower and placed a black bead above it. I carefully brought the wire back from the flower and tightened it so everything sat neatly.

From there, I continued the pattern—taking a round of the wire, adding a bead, wrapping it three times, and then adding another bead. Before placing the next bead, I added a leaf. I adjusted it slightly at an angle so it didn’t look too straight or stiff. That small adjustment made a big difference in the overall look.

Then I added a sky-blue bead (0.4 mm), wrapped the wire three times, added another bead, and continued this rhythm—bead, wrap, bead, wrap. As I kept going, I realized that maintaining even spacing was really important. I had to mentally plan where each flower would go. I decided to keep one flower in the center, two on each side, and balance everything evenly. That part needed attention, but it made the bracelet look well-designed. I repeated the process—adding flowers, black beads, reversing the wire, tightening it, placing leaves, and wrapping the wire—until I completed five flowers across the bracelet. By this point, my wrapping had become much cleaner. It really does take practice to get that smooth and neat wire finish.

At the end, I tied a final knot with the 0.5 mm wire on the circular base to secure everything.

Next, I moved on to the chains. I took a 3 cm long golden chain and, using fuse wire, attached two sky-blue beads, a tulip flower, and a leaf at the end. Then I took another chain and added a heart charm in the same way, finishing it with a knot.

One of the most challenging parts for me was attaching the jump rings to the chains. The chain was quite small, and it took patience to fit everything properly. But after trying a few different angles and holding techniques, I finally managed it.

Then I took a tiny flower chain, added a jump ring and a lobster hook, and attached it to one side of the circular bracelet. I repeated the same process on the other side with the heart charm chain. And finally, it was done.Looking at the bracelet at the end, I felt really satisfied. It wasn’t perfect at the start, but with patience and practice, it came together beautifully.