How to Make Firestarter Using Wd 40 and Charcoal - DIY Trick Everyone Should Know

Starting a fire during camping or outdoor cooking can often be one of the biggest challenges. Dry wood is not always available, making it difficult to get the first flame going.

In this guide on How to Make Firestarter, we'll show you a simple solution that makes the process much easier.

This Homemade Firestarter idea is explained step by step below, so keep reading to see how it works.

1. Charcoal (leftover charcoal from burned wood)
2. Soap
3. Gasoline
4. WD-40
5. Injection syringe (with the needle removed)
6. Small pieces of paper or thin plastic for wrapping
7. Cutter

Watch here full step by step video to make a fire starter

First, grind the charcoal into a fine powder.

Cut the soap into small pieces using a cutter.

Add the soap pieces to the powdered charcoal and mix them together.

Pour gasoline into the mixture, then add WD-40. Mix everything thoroughly until it forms a uniform mixture. This is one of those practical WD-40 life hacks that can be useful for outdoor fire starting.

Take an injection syringe and remove the needle. Pull out the plunger and fill the syringe with the prepared mixture.

Prepare small pieces of paper or thin plastic. Dispense a small amount of the mixture onto each piece and wrap it tightly, giving it the shape of a small candy. This simple Fire starter making method creates single-use firestarter packs.

Place one wrapped firestarter among the wood and ignite it with a small spark or flame.

The firestarter will continue burning for approximately 10 minutes, giving the wood enough time to catch fire. Once the wood is burning properly, you can easily start a campfire or cook outdoors. This is one of those Amazing DIY inventions that makes outdoor fire lighting much easier.