How to Make a Handmade Vase

There are many ways to make handmade vases, which can be made from plastic bottles or origami. The method of plastic bottles is relatively simple. Prepare a suitable plastic bottle, perform proper trimming, and adjust the edges appropriately.

First cut off the mouth part of the plastic bottle, leaving only the bottom and part of the bottle body, and then cut the upper part of the bottle body into thin strips with scissors. After cutting, weave the thin strips. Take one long strip, skip the side strip, and insert it behind the other two strips, one after the other, until all the strips in a circle are knitted, and the pattern of the bottle mouth is completed. The steps of origami vases are more complicated. First, prepare a piece of A4 paper. To be beautiful and beautiful, you can prepare red A4 paper. First fold it in half along the long side, and then unfold it. On both sides of the crease, fold in half according to the direction of the crease. . In this way, a gap is formed in the middle, which is half the area of A4 paper. Next, fold the parts on both sides of the gap in half along the direction of the gap, press hard to make the crease obvious, and then repeat the above steps again. At this time, the first step of A4 paper processing is enough. Next, open this piece of A4 paper, you can see that this piece of paper is divided into several parts evenly, and then this origami paper is folded along the crease according to the positive and negative steps. Flatten it firmly to make the crease obvious, and then fold the folded paper 90 degrees from the middle part on the same plane, and then unfold the paper, the middle part of the paper will have regular and uniform wavy fold lines. Fold these broken wave fold lines up and down along the crease to make it appear alternating up and down fold points. After the folding is completed, a V-shaped origami will be formed, and then one end of the paper is selected at a quarter of the whole paper, and the same horizontal plane is folded 90 degrees, and the crease is formed. Then repeat the above steps of alternate folding point, finally open the whole paper, apply glue on both ends of the wide part of the paper, glue the two ends together according to the method of folding the tip to the outside, and arrange a little to complete an origami vase.

There are many ways to make handmade vases