How to Make a Present Eye Spectacles

by jqcobl3cero in Workshop > Science

28 Views, 0 Favorites, 0 Comments

How to Make a Present Eye Spectacles

CDBAD8A5-452B-42E2-8D4E-55C6B842AF48.PNG

This product is a piece of gear that lets users see scripts on smart glasses and holds information like the scripts and a check list without needing any external power source like wifi or bluetooth.

Supplies

IMG_7349.png
IMG_7360.png
IMG_7368.png
IMG_7384.png
  1. Hard Drive
  2. Computer Chunk
  3. Glasses
  4. Light attachment
  5. Tape
  6. Light-up glasses
  7. Drill and bits
  8. Clear plastic
  9. Invasive foam

Drilling

IMG_7352.png
IMG_7353 2.png

Drill Hole in Hard Drive Stand and Computer chunk

Adding Support Bolt

IMG_7356 2.png

Add connector bolt to computer chunk and hard drive stand

Wires

IMG_7358 2.png
IMG_7359 4.png

Cut off extra wires from computer chunk

Foam

IMG_7365.png

Measure Foam and add it to the computer chunk

Add Plastic Panel

IMG_7369.png

Add plastic panel with any glue if choice

Cut and Measure Protective Plastic

IMG_7373 2.png

Cut and Measure protective plastic

Plastic Cover to Computer Chunk

Screenshot 2026-09-23 at 8.23.07 PM.png

Add protective cover using glue of your liking

Connect Computer Chunk to Hard Drive

IMG_7378.png
IMG_7379.png

Use tape to connect the two

Add Light

IMG_7383.png

Use glue to connect the light in-between foam and plastic