Tubewell Water Sensor

Tubewell Water Sensor is all in one IoT Automation to Detect Tubewell/Motor Running Water and Tank Level as well. It will Ensure that water is coming from tubewell/borewell and turn it off in there is no water for 30seconds (time can be customised). This will save motor from dry run and saves power. We are using this automation for more than 4 years without any issues.

(Basic NodeMCU / IoT knowledge is needed to create this automation)

Visit https://github.com/deepaklohia/NodeMcu-Water-Sensor for Detailed Code.

STEP-1. Connect MCU Board as per circuit Diagram.(Basic knowledge needed)

A.Node MCU Chip https://amzn.to/4eScCE1

B.Soil Sensor for Running Water Check https://amzn.to/3LhP6D2

C.Solid State Relay for pump https://amzn.to/45Uu5re

D.Electronic Relay for Starter https://amzn.to/4co7vK9

Create Blynk Account and Create a Template . Copy your Template ID and Template Name.

Create Virtual Pins on Blynk App using the snapshots .

Upload the code attached in "Edgent_Tubewell" folder after updating your BLYNK_TEMPLATE_ID/BLYNK_TEMPLATE_NAME, to Node MCU chip and Connect your device to Blynk app using Wizard on Phone. 

https://github.com/deepaklohia/NodeMcu-Water-Sensor/tree/main/Edgent_Tubewell