Wedge for Cutlery

This Wedge is used for organising Spoons and Forks. This project has the cardboard and the 3D printed designs.

1. Cardboard
2. Glue
3. Knife
4. Cardboard nails
5. Clamps
6. Black and red paint
7. Hammer
8. Sealing Tape

Mark the dimensions of your cutlery on the cardboard by using a pencil. Use a knife or an electric saw to cut and separate the cardboard.

Measure the sides of the cutlery and cut them

Fold the cardboard into shape, then glue the side part onto it. Add nails where it is needed. Clamp it and leave it to dry.

Tape the wedge, add the top coat, paint the wedge black and the top red, and finally add Polyurethane.