K'nex Sniper Rifle CCG36.
by erikos kostarikos in Living > LEGO & K'NEX
2304 Views, 5 Favorites, 0 Comments
K'nex Sniper Rifle CCG36.
This is my first instructable,so it's not very good.
To start, here is a pieces list:
rods:
Green:142
White:64
Blue:31
Yellow:0
Red:12
Grey:3
connectors:
White:8
Yellow:63
Green:4
Red:12
Grey:(Two slots)34
Grey:(One slot)60
Blue:13
Orange:46
other:
Orange track pieces:3
Tan clips:15
Blue clips:6
Y-connectors:39
To start, here is a pieces list:
rods:
Green:142
White:64
Blue:31
Yellow:0
Red:12
Grey:3
connectors:
White:8
Yellow:63
Green:4
Red:12
Grey:(Two slots)34
Grey:(One slot)60
Blue:13
Orange:46
other:
Orange track pieces:3
Tan clips:15
Blue clips:6
Y-connectors:39
The Handle.
This is a very simple handle.
If you want a better one, then try to make it yourself.
I think that would'nt be so hard.
The Stock/butt.
This may look a little crappy, but if you want you can change the stock the way like like it.
The Trigger Mechanism.
This is just a simple slingshot mechanism.
The Barrel.
This barrel is not so hard to build, but don't try to cheat and leave some open spaces between the orange connectors, because maybe it'll break then.
Connecting It Together.
This step shows you how to connect all the parts you've made.
The Quad-pod.
This is my pneumatic quad-pod.
If you put some weight on it, it'll bounce down and break the "fall".