Special Devices 7-segment displays, switches, heatsinks, crystals, transformers, etc. <author>Created by librarian@cadsoft.de</author> CRYSTAL >VALUE >NAME DIY Modules for Arduino, Raspberry Pi, CubieBoard etc. The library contains a list of symbols and footprints for popular, cheap and easy-to-use electronic modules. The modules are intend to work with microprocessor-based platforms such as <a href="http://arduino.cc">Arduino</a>, <a href="http://raspberrypi.org/">Raspberry Pi</a>, <a href="http://cubieboard.org/">CubieBoard</a>, <a href="http://beagleboard.org/">BeagleBone</a> and many others. There are many manufacturers of the modules in the world. Almost all of them can be bought on <a href="ebay.com">ebay.com</a>. By using this library, you can design a PCB for devices created with usage of modules. Even if you do not need to create PCB design, you can also use the library to quickly document your work by drawing schematics of devices built by you. The latest version, examples, photos and much more can be found at: <a href="http://diymodules.org/eagle">diymodules.org/eagle</a> Comments, suggestions and bug reports please send to: <a href="mailto:eagle@diymodules.org">eagle@diymodules.org</a> Version: 1.8.0 (2017-Jul-02) Created by: Miroslaw Brudnowski Released under the Creative Commons Attribution 4.0 International License: <a href="http://creativecommons.org/licenses/by/4.0">http://creativecommons.org/licenses/by/4.0</a> <center> <a href="http://diymodules.org/eagle"><img src="http://www.diymodules.org/img/diymodules-lbr-image.php?v=1.8.0" alt="DIYmodules.org"></a> </center> Bluetooth Transceiver Module based on HC-05 board >NAME >VALUE STATE RX TX GND +5V EN ANTENNA Male(J), Female(P) and Pin HeadersVersion 1.02 - 03/10/2009 This library is a collection of various pin headers and AMP, Molex and 3M board-to-board connectors. This library assumes the notion of JACKS(male) and PLUGS(female) as represented by the J and P symbols. Standard male/female pin header types are available in common 0.1" and 2 mm pitch types with alternate mirrored footprints as well. THIS LIBRARY IS PROVIDED AS IS AND WITHOUT WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED. USE AT YOUR OWN RISK! <author>Copyright (C) 2008, Bob Starr http://www.bobstarr.net </author> SIP Header - 0.1", 32 mil drill >NAME >VALUE Linear Devices Operational amplifiers, comparators, voltage regulators, ADCs, DACs, etc. <author>Created by librarian@cadsoft.de</author> TO 200 vertical >NAME >VALUE 1 2 3 Sensores de Temperatura TO-92 >NAME >VALUE Omron Switches <author>Created by librarian@cadsoft.de</author> OMRON SWITCH >NAME >VALUE 1 2 3 4 >NAME >VALUE WIMA Capacitors <author>Created by librarian@cadsoft.de</author> MKS3, 10 x 6 mm, grid 7.62 mm >NAME >VALUE Default symbols for import LTspice schematics 2012-10-29 alf@cadsoft.de RESISTOR type 0207, grid 10 mm >NAME >VALUE Female Headers etc. Naming: FE = female # contacts - # rows W = angled <author>Created by librarian@cadsoft.de</author> FEMALE HEADER >NAME 1 >VALUE 7 PTR Connectors Aug. 2004 / PTR Meßtechnik: Die Bezeichnung der Serie AK505 wurde geändert. Es handelt sich hierbei um AK500 in horizontaler Ausführung. <TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2> <TR> <TD ALIGN=LEFT> Alte Bezeichnung </TD> <TD ALIGN=LEFT> Neue Bezeichnung </TD> </TR> <TR> <TD ALIGN=LEFT> AK505/2,grau </TD> <TD ALIGN=LEFT> AK500/2-5.0-H-GRAU </TD> </TR> <TR> <TD ALIGN=LEFT> AK505/2DS,grau </TD> <TD ALIGN=LEFT> AK500/2DS-5.0-H-GRAU </TD> </TR> <TR> <TD ALIGN=LEFT> AKZ505/2,grau </TD> <TD ALIGN=LEFT> AKZ500/2-5.08-H-GRAU </TD> </TABLE> <author>Created by librarian@cadsoft.de</author> CONNECTOR Aug. 2004 / PTR Meßtechnik: Die Bezeichnung der Serie AK505 wurde geändert. Es handelt sich hierbei um AK500 in horizontaler Ausführung. >NAME >VALUE 1 2 EAGLE Design Rules Die Standard-Design-Rules sind so gewählt, dass sie für die meisten Anwendungen passen. Sollte ihre Platine besondere Anforderungen haben, treffen Sie die erforderlichen Einstellungen hier und speichern die Design Rules unter einem neuen Namen ab. EAGLE Design Rules The default Design Rules have been set to cover a wide range of applications. Your particular design may have different requirements, so please make the necessary adjustments and save your customized design rules under a new name.