ELECTROCORNER 2020
LED Letter Keychain
F:/Alexis/Electronica/Logo/logo bien.bmp
ELECTROCORNER 2020
<b>Linear Devices</b><p>
Operational amplifiers, comparators, voltage regulators, ADCs, DACs, etc.<p>
<author>Created by librarian@cadsoft.de</author>
<b>SOIC-8</b> CASE 751-07<p>
Source: http://www.onsemi.com/pub/Collateral/MC34164-D.PDF<p>
<b>D (R-PDSO-G8)</b>PLATIC SMALL-OUTLINE PACKAGE<br>
Source: http://focus.ti.com/lit/ds/symlink/tlc27l2.pdf
>NAME
>VALUE
SOIC-8 CASE 751-07
Source: http://www.onsemi.com/pub/Collateral/MC34164-D.PDF
D (R-PDSO-G8)PLATIC SMALL-OUTLINE PACKAGE
Source: http://focus.ti.com/lit/ds/symlink/tlc27l2.pdf
<h3>SparkFun Switches, Buttons, Encoders</h3>
In this library you'll find switches, buttons, joysticks, and anything that moves to create or disrupt an electrical connection.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
<h3>Momentary Switch (Pushbutton) - SPST - SMD, 5.2mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://www.sparkfun.com/datasheets/Components/Buttons/SMD-Button.pdf">Dimensional Drawing</a></p>
>Name
>Value
Momentary Switch (Pushbutton) - SPST - SMD, 5.2mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Dimensional Drawing
<b>Lithium Batteries and NC Accus</b><p>
<author>Created by librarian@cadsoft.de</author>
<b>Battery Holder, SMT, 12mm</b><p>
multicomp PART NO. CH291-1220LF<br>
Source: <a href="http://www.farnell.com/datasheets/1505860.pdf"> Data sheet </a>
>NAME
>VALUE
Battery Holder, SMT, 12mm
multicomp PART NO. CH291-1220LF
Source: Data sheet
<h3>SparkFun Electronics' Retired foot prints</h3>
In this library you'll find all manner of retired footprints for resistors, capacitors, board names, ICs, etc., that are <b> no longer used</b> in our catalog.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
>NAME
>VALUE
<b>EAGLE Design Rules</b>
<p>
Die Standard-Design-Rules sind so gewählt, dass sie für
die meisten Anwendungen passen. Sollte ihre Platine
besondere Anforderungen haben, treffen Sie die erforderlichen
Einstellungen hier und speichern die Design Rules unter
einem neuen Namen ab.
<b>EAGLE Design Rules</b>
<p>
The default Design Rules have been set to cover
a wide range of applications. Your particular design
may have different requirements, so please make the
necessary adjustments and save your customized
design rules under a new name.
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.