/*
   Specify which protocol(s) should be used for decoding.
   If no protocol is defined, all protocols (except Bang&Olufsen) are active.
   This must be done before the #include <IRremote.hpp>
*/
//#define DECODE_DENON        // Includes Sharp
//#define DECODE_JVC
//#define DECODE_KASEIKYO
//#define DECODE_PANASONIC    // alias for DECODE_KASEIKYO
//#define DECODE_LG
//#define DECODE_NEC          // Includes Apple and Onkyo
//#define DECODE_SAMSUNG
//#define DECODE_SONY
//#define DECODE_RC5
//#define DECODE_RC6
//#define DECODE_BOSEWAVE
//#define DECODE_LEGO_PF
//#define DECODE_MAGIQUEST
//#define DECODE_WHYNTER
//#define DECODE_FAST
//#define DECODE_DISTANCE_WIDTH // Universal decoder for pulse distance width protocols
//#define DECODE_HASH         // special decoder for all protocols
//#define DECODE_BEO          // This protocol must always be enabled manually, i.e. it is NOT enabled if no protocol is defined. It prevents decoding of SONY!

//#define DEBUG               // Activate this for lots of lovely debug output from the decoders.
//#define RAW_BUFFER_LENGTH  180  // Default is 112 if DECODE_MAGIQUEST is enabled, otherwise 100.

#include <Arduino.h>

/*
   This include defines the actual pin number for pins like IR_RECEIVE_PIN, IR_SEND_PIN for many different boards and architectures
*/
#define IR_RECEIVE_PIN          15
#define IR_SEND_PIN             14

#include <IRremote.hpp>

void setup() {
  Serial.begin(115200);
  Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_IRREMOTE));
  // Start the receiver and if not 3. parameter specified, take LED_BUILTIN pin from the internal boards definition as default feedback LED
  IrReceiver.begin(IR_RECEIVE_PIN, ENABLE_LED_FEEDBACK);
  Serial.print(F("Ready to receive IR signals of protocols: "));
  printActiveIRProtocols(&Serial);
  Serial.printf("at pin %d\n", IR_RECEIVE_PIN);
}

void loop() {
  /*
     Check if received data is available and if yes, try to decode it.
     Decoded result is in the IrReceiver.decodedIRData structure.

     E.g. command is in IrReceiver.decodedIRData.command
     address is in command is in IrReceiver.decodedIRData.address
     and up to 32 bit raw data in IrReceiver.decodedIRData.decodedRawData
  */
  if (IrReceiver.decode()) {
    IrReceiver.printIRResultShort(&Serial);
    IrReceiver.printIRSendUsage(&Serial);
    if (IrReceiver.decodedIRData.protocol == UNKNOWN) {
      Serial.println(F("Received noise or an unknown (or not yet enabled) protocol"));
      // We have an unknown protocol here, print more info
      IrReceiver.printIRResultRawFormatted(&Serial, true);
    }
    Serial.println();

    /*
       !!!Important!!! Enable receiving of the next value,
       since receiving has stopped after the end of the current received data packet.
    */
    IrReceiver.resume(); // Enable receiving of the next value

    /*
       Finally, check the received data and perform actions according to the received command
    */
    if (IrReceiver.decodedIRData.command == 0x16) {
      // do something
    }
    else if (IrReceiver.decodedIRData.command == 0x19) {
      // do something else
    }
  }
}