ISO-10303-21;
HEADER;
FILE_DESCRIPTION(('STEP AP242 Edition 2','STEP AP242 Edition 2''CAx-IF Rec.Pracs.---Representation and Presentation of Product Manufa
cturing Information (PMI)---4.0---2014-10-13','STEP AP242 Edition 2''CAx-IF Rec.Pracs.---Representation and Presentation of Product Manufa
cturing Information (PMI)---4.0---2014-10-13''CAx-IF Rec.Pracs.---3D Tessellated Geometry---0.4---2014-09-14','STEP AP242 Edition 2''CAx-IF Rec.Pracs.---Representation and Presentation of Product Manufa
cturing Information (PMI)---4.0---2014-10-13''CAx-IF Rec.Pracs.---3D Tessellated Geometry---0.4---2014-09-14''2;1','STEP AP242 Edition 2''CAx-IF Rec.Pracs.---Representation and Presentation of Product Manufa
cturing Information (PMI)---4.0---2014-10-13''CAx-IF Rec.Pracs.---3D Tessellated Geometry---0.4---2014-09-14''2;1''CAx-IF Rec.Pracs.---User Defined Attributes---1.5---2016-08-15'),'2;1');
FILE_NAME('SlapDown Intake - 25t Gear Roller.step','2026-03-24T21:56:34',(''),(''),'ST-DEVELOPER v20','ONSHAPE BY PTC INC, 1.212','');
FILE_SCHEMA(('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF { 1 0 10303 442 3 1 4 }'));
ENDSEC;
DATA;
#23647=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#23648)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#23651,#23650,#23649)) REPRESENTATION_CONTEXT('25t Gear Roller','TOP_LEVEL_ASSEMBLY_PART') );
#23648=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(8.48405820500233E-06),#23651,'DISTANCE_ACCURACY_VALUE','Maximum Tolerance applied to model');
#23649=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
#23650=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
#23651=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT($,.METRE.) );
#23652=PRODUCT_DEFINITION_SHAPE('','',#23653);
#23653=PRODUCT_DEFINITION('','',#23655,#23654);
#23654=PRODUCT_DEFINITION_CONTEXT('',#23661,'design');
#23655=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','',#23657,.NOT_KNOWN.);
#23656=PRODUCT_RELATED_PRODUCT_CATEGORY('','',(#23657));
#23657=PRODUCT('25t Gear Roller','25t Gear Roller','25t Gear Roller',(#23659));
#23658=PRODUCT_CATEGORY('','');
#23659=PRODUCT_CONTEXT('',#23661,'mechanical');
#23660=APPLICATION_PROTOCOL_DEFINITION('international standard','ap242_managed_model_based_3d_engineering',2020,#23661);
#23661=APPLICATION_CONTEXT('managed model based 3d engineering');
ENDSEC;
END-ISO-10303-21;