/*
  If your serial output has these values same then Your nrf24l01 module is in working condition :
  
  EN_AA          = 0x3f
  EN_RXADDR      = 0x02
  RF_CH          = 0x4c
  RF_SETUP       = 0x03
  CONFIG         = 0x0f
  
  This code is under public domain
  
  Last updated on 21/08/28 
  https://dhirajkushwaha.com/elekkrypt
 */

#include <SPI.h>
#include <RF24.h>
#include <printf.h>

RF24 radio(9,10);

byte addresses[][6] = {"1Node", "2Node"};


void setup() {
  radio.begin();
  radio.setPALevel(RF24_PA_LOW);
  
  radio.openWritingPipe(addresses[0]);
  radio.openReadingPipe(1, addresses[1]); 
  radio.startListening();
  
  Serial.begin(115200);
  printf_begin();

  radio.printDetails();
  
}

void loop() {
//  empty

}