#include #include #include #include #include #include #include #include #include const char* ssid = "FiberHGW_ZT5A27_2.4GHz"; const char* password = "hYyYzPXcAP"; int curr; WiFiUDP ntpUDP; NTPClient timeClient(ntpUDP, "pool.ntp.org",0,10000); AsyncWebServer server(80); const char* PARAM_STRING = "inputString"; const char* PARAM_INT = "inputInt"; const char* PARAM_FLOAT = "inputFloat"; // HTML web page to handle 3 input fields (inputString, inputInt, inputFloat) const char index_html[] PROGMEM = R"rawliteral( RB KOMBI ZAMANLAYICI

RIGHTBASS KOMBI ZAMANLAYICI
PARAMETRE AYARI (kayitli parametre: %inputString% ):

ÇALIŞMA SAATi-1(kayitli saat: %inputInt% ):

ÇALIŞMA SAATi-2(kayitli saat: %inputFloat% ): 

Saat değerleri 00-24 arasıdır. Dışındaki herhangi bir rakam saat ayarı iptal olarak algılanır.

_______LEJANT_______________

(Parametre) A= Saat1: 1 saat , Saat2: 1 saat.

(Parametre) B= Saat1: 1 saat , Saat2: 2 saat.

(Parametre) C= Saat1: 2 saat , Saat2: 2 saat.

(Parametre) D= Saat1: 2 saat , Saat2: 1 saat.

Parametre değeri boş ise A seçilmiş sayılır.

)rawliteral"; void notFound(AsyncWebServerRequest *request) { request->send(404, "text/plain", "Not found"); } String readFile(fs::FS &fs, const char * path){ // Serial.printf("Reading file: %s\r\n", path); File file = fs.open(path, "r"); if(!file || file.isDirectory()){ // Serial.println("- empty file or failed to open file"); return String(); } // Serial.println("- read from file:"); String fileContent; while(file.available()){ fileContent+=String((char)file.read()); } file.close(); // Serial.println(fileContent); return fileContent; } void writeFile(fs::FS &fs, const char * path, const char * message){ // Serial.printf("Writing file: %s\r\n", path); File file = fs.open(path, "w"); if(!file){ // Serial.println("- failed to open file for writing"); return; } if(file.print(message)){ // Serial.println("- file written"); } else { // Serial.println("- write failed"); } file.close(); } // Replaces placeholder with stored values String processor(const String& var){ //Serial.println(var); if(var == "inputString"){ return readFile(SPIFFS, "/inputString.txt"); } else if(var == "inputInt"){ return readFile(SPIFFS, "/inputInt.txt"); } else if(var == "inputFloat"){ return readFile(SPIFFS, "/inputFloat.txt"); } return String(); } void setup() { // put your setup code here, to run once: // Serial.begin(115200); pinMode(0,OUTPUT); digitalWrite(0, HIGH); SPIFFS.begin(); WiFi.begin(ssid, password); while (WiFi.status() != WL_CONNECTED) { delay(500); } // Serial.println(); // Serial.print("IP Address: "); // Serial.println(WiFi.localIP()); if(!SPIFFS.begin()){ // Serial.println("An Error has occurred while mounting SPIFFS"); return;} timeClient.begin(); // Set offset time in seconds to adjust for your timezone, for example: // GMT +1 = 3600 // GMT +8 = 28800 // GMT -1 = -3600 // GMT 0 = 0 timeClient.setTimeOffset(10800); // Send web page with input fields to client server.on("/", HTTP_GET, [](AsyncWebServerRequest *request){ request->send_P(200, "text/html", index_html, processor); }); // Send a GET request to /get?inputInt2= server.on("/get", HTTP_GET, [] (AsyncWebServerRequest *request) { String inputMessage; // GET inputString value on /get?inputString= if (request->hasParam(PARAM_STRING)) { inputMessage = request->getParam(PARAM_STRING)->value(); writeFile(SPIFFS, "/inputString.txt", inputMessage.c_str()); } // GET inputInt value on /get?inputInt= else if (request->hasParam(PARAM_INT)) { inputMessage = request->getParam(PARAM_INT)->value(); writeFile(SPIFFS, "/inputInt.txt", inputMessage.c_str()); } // GET inputFloat value on /get?inputFloat= else if (request->hasParam(PARAM_FLOAT)) { inputMessage = request->getParam(PARAM_FLOAT)->value(); writeFile(SPIFFS, "/inputFloat.txt", inputMessage.c_str()); } else { inputMessage = "No message sent"; } // Serial.println(inputMessage); request->send(200, "text/text", inputMessage); }); server.onNotFound(notFound); server.begin(); } void loop() { // put your main code here, to run repeatedly: timeClient.update(); int curr = timeClient.getHours(); int swmod1; String mod1 = readFile(SPIFFS, "/inputString.txt"); int set2 = readFile(SPIFFS, "/inputInt.txt").toInt(); int set3 = readFile(SPIFFS, "/inputFloat.txt").toInt(); if (mod1 == "A"){ swmod1=1;} if (mod1 == "B"){ swmod1=2;} if (mod1 == "C"){ swmod1=3;} if (mod1 == "D"){ swmod1=4;} switch(swmod1){ case 1: if( set2 == curr || set3 == curr ) {delay(500); digitalWrite(0, LOW); delay(100);} else{ digitalWrite(0, HIGH);} break; case 2: if( set2 == curr || set3 == curr || set3+1 == curr ) { delay(500); digitalWrite(0, LOW); delay(100);} else{ digitalWrite(0, HIGH);} break; case 3: if( set2 == curr || set3 == curr || set3+1 == curr || set2+1 == curr ) { delay(500); digitalWrite(0, LOW); delay(100);} else{ digitalWrite(0, HIGH);} break; case 4: if( set2 == curr || set3 == curr || set2+1 == curr ) { delay(500); digitalWrite(0, LOW); delay(100);} else{ digitalWrite(0, HIGH);} break; default: if( set2 == curr || set3 == curr ) { delay(500); digitalWrite(0, LOW); delay(100);} else{ digitalWrite(0, HIGH);} break; } }